VAR-SOM-MX7 B2QT

VAR-SOM-MX7 B2Qt Thud

• 

B2Qt project is a framework for creating a Linux distributions for embedded devices. It's layering mechanism makes it easy to add Linux to new target devices highly customized for a particular platform; it can include custom start-up scripts, software packages built with a high degree of optimization for a particular architecture, and different user interfaces from full Gnome desktop to a simple a serial console.

This release is based on Freescale/NXP Community BSP layer for Yocto framework. Variscite extends this layer to support its i.MX7 System On Modules.

Release version: thud-b2qt-4.14.78-mx7-v1.0

General

General

• First Time? Start Here
• Using the recovery SD card
• VAR-SOM-MX7 Changelog

Programming

• Hello World 'C' application
• Building a Qt Hello World
• Debugging with Eclipse
• Debugging with Visual Studio Code
• TFTP & NFS

Build

Build B2Qt, Linux and U-Boot

• Release Notes
• Setting a Development Environment
• Build B2Qt from source code
• B2Qt common build errors
• Customizing U-Boot
• Customizing the Linux kernel
• Toolchain installation for out of B2Qt builds
• Build U-Boot from source code
• Build the Linux kernel from source code
• Burning B2Qt binaries to NAND flash/eMMC via SD card
• Burning B2Qt binaries to NAND flash/eMMC via Ethernet
• Burning B2Qt binaries to NAND flash from U-Boot
• U-Boot features
• Adding packages to B2Qt
• Replace the Linux logo
• Secure Boot / High Assurance Boot (HAB)
• SWUpdate Guide
• Booting from USB using the imx_usb_loader utility
• Docker Guide

How-to

Test and use an Interface

• ADC
• Audio record/play
• Backlight
• Bluetooth
• Bluetooth A2DP
• Bluetooth file transfer
• Bluetooth Low Energy
• CAN bus
• Camera
• CPU freq. and number of cores
• Display
• Ethernet
• Ethernet MAC addresses
• External UART
• GPIO
• I2C
• RTC
• SPI
• Static IP address
• Suspend
• USB Host
• USB OTG
• User Buttons
• Watchdog
• Wireless LAN
• WiFi using connman

To the top