VAR-SOM-AM43 GPIO: Difference between revisions
From Variscite Wiki
| Line 34: | Line 34: | ||
</pre> | </pre> | ||
Each GPIO is defined as in or out and the state is shown as lo or hi. | Each GPIO is defined as in or out and the state is shown as lo or hi. | ||
<br/>For example , | <br/>For example , SW4 the Menu Button:<br> | ||
When SD-Card is removed the state will be: | When SD-Card is removed the state will be: | ||
<pre> | <pre> | ||
gpio- | gpio-166 (sw4 ) in lo IRQ | ||
</pre> | </pre> | ||
When the SD-Card is plugged the state will be: | When the SD-Card is plugged the state will be: | ||
<pre> | <pre> | ||
gpio- | gpio-166 (sw4 ) in hi IRQ | ||
</pre> | </pre> | ||
Revision as of 17:00, 23 December 2015
VAR-SOM-AM43 - GPIO
GPIO state
The current state of the systems' GPIOs can be obtained in user-mode, as shown in the following example:
$ cat /sys/kernel/debug/gpio
The above command on Variscite's VAR-DVK-AM43 will show the following:
root@varsomam43:~# cat /sys/kernel/debug/gpio GPIOs 0-31, platform/44e07000.gpio, gpio: gpio-6 (cd ) in lo IRQ GPIOs 32-63, platform/4804c000.gpio, gpio: gpio-48 (kim ) out lo gpio-52 (vmmcwl_fixed ) out lo GPIOs 64-95, platform/481ac000.gpio, gpio: GPIOs 96-127, platform/481ae000.gpio, gpio: GPIOs 128-159, platform/48320000.gpio, gpio: gpio-136 (? ) out lo gpio-154 (? ) out lo gpio-157 (ft5x06_irq_gpio ) in hi IRQ GPIOs 160-191, platform/48322000.gpio, gpio: gpio-164 (sw6 ) in hi IRQ gpio-165 (sw5 ) in hi IRQ gpio-166 (sw4 ) in hi IRQ gpio-167 (vtt_fixed ) out hi GPIOs 510-511, platform/50000000.gpmc, omap-gpmc:
Each GPIO is defined as in or out and the state is shown as lo or hi.
For example , SW4 the Menu Button:
When SD-Card is removed the state will be:
gpio-166 (sw4 ) in lo IRQ
When the SD-Card is plugged the state will be:
gpio-166 (sw4 ) in hi IRQ
Manipulating a single GPIO via /sys/class/gpio
Reference reading
http://processors.wiki.ti.com/index.php/Linux_PSP_GPIO_Driver_Guide