Debian Platform Customization: Difference between revisions
(Drop "nature of release") |
No edit summary |
||
Line 2,996: | Line 2,996: | ||
<section begin=RELEASE_BULLSEYE_V2.1_DART-MX8M-MINI/>{{#lst:DPC_DART-MX8M-MINI|RELEASE_BULLSEYE_V2.1_DART-MX8M-MINI}}<section end=RELEASE_BULLSEYE_V2.1_DART-MX8M-MINI/> | <section begin=RELEASE_BULLSEYE_V2.1_DART-MX8M-MINI/>{{#lst:DPC_DART-MX8M-MINI|RELEASE_BULLSEYE_V2.1_DART-MX8M-MINI}}<section end=RELEASE_BULLSEYE_V2.1_DART-MX8M-MINI/> | ||
<section begin=RELEASE_BULLSEYE_V2.2_DART-MX8M-MINI/>{{#lst:DPC_DART-MX8M-MINI|RELEASE_BULLSEYE_V2.2_DART-MX8M-MINI}}<section end=RELEASE_BULLSEYE_V2.2_DART-MX8M-MINI/> | <section begin=RELEASE_BULLSEYE_V2.2_DART-MX8M-MINI/>{{#lst:DPC_DART-MX8M-MINI|RELEASE_BULLSEYE_V2.2_DART-MX8M-MINI}}<section end=RELEASE_BULLSEYE_V2.2_DART-MX8M-MINI/> | ||
<section begin=mx8mm-debian-bullseye-5.4-2.1.x-v1.3/><!-- | |||
-->{{#lst:DPC_DART-MX8M-MINI|RELEASE_BULLSEYE_V2.2_DART-MX8M-MINI}}<!-- | -->{{#lst:DPC_DART-MX8M-MINI|RELEASE_BULLSEYE_V2.2_DART-MX8M-MINI}}<!-- | ||
-->{{#lst:DPC_DART-MX8M-MINI|mx8mm-debian-bullseye-5.4-2.1.x-v1.3}}<!-- | -->{{#lst:DPC_DART-MX8M-MINI|mx8mm-debian-bullseye-5.4-2.1.x-v1.3}}<!-- |
Revision as of 22:19, 17 May 2022
Debian
Documentation
Stretch 9
- Debian 9 - Stretch (released on 06/17/2017)
Documentation is available from wiki.debian.org
VAR-SOM-MX6
Build Results
The resulted images are located in /output/.
Image name |
How to use |
---|---|
rootfs.tar.gz | Root filesystem tarball used for installation on SD card and eMMC |
uImage | Linux kernel image |
SPL.nand | SPL built for NAND. The SPL is pre-U-Boot SW component, required for DDR initialization |
SPL.emmc | SPL built for SD card and eMMC boot. The SPL is pre-U-Boot SW component, required for DDR initialization |
u-boot.img.nand | U-Boot built for NAND flash |
u-boot.img.mmc | U-Boot built for SD card or eMMC boot |
Device Tree name |
Details |
imx6dl-var-som-solo-cap.dtb | VAR-SOM-SOLO with iMX6S/DL on MX6CustomBoard with capacitive touch |
imx6dl-var-som-solo-res.dtb | VAR-SOM-SOLO with iMX6S/DL on MX6CustomBoard with resistive touch |
imx6dl-var-som-solo-vsc.dtb | VAR-SOM-SOLO with iMX6S/DL on SOLOCustomBoard with capacitive touch |
imx6dl-var-som-cap.dtb | VAR-SOM-MX6 with iMX6S/DL on MX6CustomBoard with capacitive touch |
imx6dl-var-som-res.dtb | VAR-SOM-MX6 with iMX6S/DL on MX6CustomBoard with resistive touch |
imx6dl-var-som-vsc.dtb | VAR-SOM-MX6 with iMX6S/DL on SOLOCustomBoard with capacitive touch |
imx6q-var-som-cap.dtb | VAR-SOM-MX6 with iMX6D/Q on MX6CustomBoard with capacitive touch |
imx6q-var-som-res.dtb | VAR-SOM-MX6 with iMX6D/Q on MX6CustomBoard with resistive touch |
imx6q-var-som-vsc.dtb | VAR-SOM-MX6 with iMX6D/Q on SOLOCustomBoard with capacitive touch |
imx6qp-var-som-cap.dtb | VAR-SOM-MX6 with iMX6DP/QP on MX6CustomBoard with capacitive touch |
imx6qp-var-som-res.dtb | VAR-SOM-MX6 with iMX6DP/QP on MX6CustomBoard with resistive touch |
imx6qp-var-som-vsc.dtb | VAR-SOM-MX6 with iMX6DP/QP on SOLOCustomBoard with capacitive touch |
imx6q-var-dart.dtb | DART-MX6 with iMX6D/Q on DARTCustomBoard with capacitive touch |
DART-6UL
Build Results
The resulted images are located in /output/.
Image name |
How to use |
---|---|
rootfs.tar.gz | Root filesystem tarball used for installation on SD card and eMMC |
rootfs.ubi.img | Use for flash to NAND |
zImage | Linux kernel image |
SPL.nand | SPL built for NAND. The SPL is pre-U-Boot SW component, required for DDR initialization |
SPL.emmc | SPL built for SD card and eMMC boot. The SPL is pre-U-Boot SW component, required for DDR initialization |
u-boot.img.nand | U-Boot built for NAND flash |
u-boot.img.emmc | U-Boot built for SD card or eMMC |
Device Tree name |
Details |
imx6ul-var-dart-emmc_wifi.dtb | DART-6UL with eMMC and WiFi enabled. (SD card & NAND disabled) |
imx6ul-var-dart-nand_wifi.dtb | DART-6UL with l NAND and WiFi enabled. (SD card & eMMC disabled) |
imx6ul-var-dart-sd_emmc.dtb | DART-6UL with SD card and eMMC enabled (WiFi & NAND disabled). You can boot from eMMC or SD card |
imx6ul-var-dart-sd_nand.dtb | DART-6UL with SD card and NAND enabled (WiFi & eMMC disabled). You can boot from NAND or SD card |
imx6ul-var-dart-5g-emmc_wifi.dtb | DART-6UL-5G with eMMC and WiFi enabled. (SD card & NAND disabled) |
imx6ul-var-dart-5g-nand_wifi.dtb | DART-6UL-5G with l NAND and WiFi enabled. (SD card & eMMC disabled) |
imx6ull-var-dart-emmc_wifi.dtb | DART-6ULL with eMMC and WiFi enabled. (SD card & NAND disabled) |
imx6ull-var-dart-nand_wifi.dtb | DART-6ULL with l NAND and WiFi enabled. (SD card & eMMC disabled) |
imx6ull-var-dart-sd_emmc.dtb | DART-6ULL with SD card and eMMC enabled (WiFi & NAND disabled). You can boot from eMMC or SD card |
imx6ull-var-dart-sd_nand.dtb | DART-6ULL with SD card and NAND enabled (WiFi & eMMC disabled). You can boot from NAND or SD card |
imx6ull-var-dart-5g-emmc_wifi.dtb | DART-6ULL-5G with eMMC and WiFi enabled. (SD card & NAND disabled) |
imx6ull-var-dart-5g-nand_wifi.dtb | DART-6ULL-5G with l NAND and WiFi enabled. (SD card & eMMC disabled) |
The resulted images are located in /output/.
Image name |
How to use |
---|---|
rootfs.tar.gz | Root filesystem tarball used for installation on SD card and eMMC |
rootfs.ubi.img | Use for flash to NAND |
zImage | Linux kernel image |
SPL.nand | SPL built for NAND. The SPL is pre-U-Boot SW component, required for DDR initialization |
SPL.mmc | SPL built for SD card and eMMC boot. The SPL is pre-U-Boot SW component, required for DDR initialization |
u-boot.img.nand | U-Boot built for NAND flash |
u-boot.img.mmc | U-Boot built for SD card or eMMC |
Device Tree name |
Details |
imx6ull-var-dart-6ulcustomboard-emmc-sd-card.dtb | Device tree blob for DART-6UL with i.MX6ULL SOC, eMMC & SD card enabled. (NAND flash & WiFi disabled) |
imx6ull-var-dart-6ulcustomboard-emmc-wifi.dtb | Device tree blob for DART-6UL with i.MX6ULL SOC, eMMC & WiFi enabled. (NAND flash & SD card disabled) |
imx6ull-var-dart-6ulcustomboard-nand-sd-card.dtb | Device tree blob for DART-6UL with i.MX6ULL SOC, NAND flash & SD card enabled. (eMMC & WiFi disabled) |
imx6ull-var-dart-6ulcustomboard-nand-wifi.dtb | Device tree blob for DART-6UL with i.MX6ULL SOC, NAND flash & WiFi enabled. (eMMC & SD card disabled) |
imx6ul-var-dart-6ulcustomboard-emmc-sd-card.dtb | Device tree blob for DART-6UL with i.MX6UL SOC, eMMC & SD card enabled. (NAND flash & WiFi disabled) |
imx6ul-var-dart-6ulcustomboard-emmc-wifi.dtb | Device tree blob for DART-6UL with i.MX6UL SOC, eMMC & WiFi enabled. (NAND flash & SD card disabled) |
imx6ul-var-dart-6ulcustomboard-nand-sd-card.dtb | Device tree blob for DART-6UL with i.MX6UL SOC, NAND flash & SD card enabled. (eMMC & WiFi disabled) |
imx6ul-var-dart-6ulcustomboard-nand-wifi.dtb | Device tree blob for DART-6UL with i.MX6UL SOC, NAND flash & WiFi enabled. (eMMC & SD card disabled) |
imx6ulz-var-dart-6ulcustomboard-emmc-sd-card.dtb | Device tree blob for DART-6UL with i.MX6ULZ SOC, eMMC & SD card enabled. (NAND flash & WiFi disabled) |
imx6ulz-var-dart-6ulcustomboard-emmc-wifi.dtb | Device tree blob for DART-6UL with i.MX6ULZ SOC, eMMC & WiFi enabled. (NAND flash & SD card disabled) |
imx6ulz-var-dart-6ulcustomboard-nand-sd-card.dtb | Device tree blob for DART-6UL with i.MX6ULZ SOC, NAND flash & SD card enabled. (eMMC & WiFi disabled) |
imx6ulz-var-dart-6ulcustomboard-nand-wifi.dtb | Device tree blob for DART-6UL with i.MX6ULZ SOC, NAND flash & WiFi enabled. (eMMC & SD card disabled) |
imx6ull-var-som-concerto-board-emmc-sd-card.dtb | Device tree blob for VAR-SOM-6UL with i.MX6ULL SOC, eMMC & SD card enabled. (NAND flash & WiFi disabled) |
imx6ull-var-som-concerto-board-emmc-wifi.dtb | Device tree blob for VAR-SOM-6UL with i.MX6ULL SOC, eMMC & WiFi enabled. (NAND flash & SD card disabled) |
imx6ull-var-som-concerto-board-nand-sd-card.dtb | Device tree blob for VAR-SOM-6UL with i.MX6ULL SOC, NAND flash & SD card enabled. (eMMC & WiFi disabled) |
imx6ull-var-som-concerto-board-nand-wifi.dtb | Device tree blob for VAR-SOM-6UL with i.MX6ULL SOC, NAND flash & WiFi enabled. (eMMC & SD card disabled) |
imx6ul-var-som-concerto-board-emmc-sd-card.dtb | Device tree blob for VAR-SOM-6UL with i.MX6UL SOC, eMMC & SD card enabled. (NAND flash & WiFi disabled) |
imx6ul-var-som-concerto-board-emmc-wifi.dtb | Device tree blob for VAR-SOM-6UL with i.MX6UL SOC, eMMC & WiFi enabled. (NAND flash & SD card disabled) |
imx6ul-var-som-concerto-board-nand-sd-card.dtb | Device tree blob for VAR-SOM-6UL with i.MX6UL SOC, NAND flash & SD card enabled. (eMMC & WiFi disabled) |
imx6ul-var-som-concerto-board-nand-wifi.dtb | Device tree blob for VAR-SOM-6UL with i.MX6UL SOC, NAND flash & WiFi enabled. (eMMC & SD card disabled) |
imx6ulz-var-som-concerto-board-emmc-sd-card.dtb | Device tree blob for VAR-SOM-6UL with i.MX6ULZ SOC, eMMC & SD card enabled. (NAND flash & WiFi disabled) |
imx6ulz-var-som-concerto-board-emmc-wifi.dtb | Device tree blob for VAR-SOM-6UL with i.MX6ULZ SOC, eMMC & WiFi enabled. (NAND flash & SD card disabled) |
imx6ulz-var-som-concerto-board-nand-sd-card.dtb | Device tree blob for VAR-SOM-6UL with i.MX6ULZ SOC, NAND flash & SD card enabled. (eMMC & WiFi disabled) |
imx6ulz-var-som-concerto-board-nand-wifi.dtb | Device tree blob for VAR-SOM-6UL with i.MX6ULZ SOC, NAND flash & WiFi enabled. (eMMC & SD card disabled) |
The resulted images are located in /output/.
Image name |
How to use |
---|---|
rootfs.tar.gz | Root filesystem tarball used for installation on SD card and eMMC |
rootfs.ubi.img | Console only image for installation on NAND flash |
zImage | Linux kernel image |
SPL.nand | SPL built for NAND. The SPL is pre-U-Boot SW component, required for DDR initialization |
SPL.mmc | SPL built for SD card and eMMC boot. The SPL is pre-U-Boot SW component, required for DDR initialization |
u-boot.img.nand | U-Boot built for NAND flash |
u-boot.img.mmc | U-Boot built for SD card or eMMC |
kernel-headers | kernel headers folder for package creation |
Device Tree name |
Details |
imx6ull-var-dart-6ulcustomboard-emmc-sd-card.dtb | Device tree blob for DART-6UL with i.MX6ULL SOC, eMMC & SD card enabled. (NAND flash & WiFi disabled) |
imx6ull-var-dart-6ulcustomboard-emmc-wifi.dtb | Device tree blob for DART-6UL with i.MX6ULL SOC, eMMC & WiFi enabled. (NAND flash & SD card disabled) |
imx6ull-var-dart-6ulcustomboard-nand-sd-card.dtb | Device tree blob for DART-6UL with i.MX6ULL SOC, NAND flash & SD card enabled. (eMMC & WiFi disabled) |
imx6ull-var-dart-6ulcustomboard-nand-wifi.dtb | Device tree blob for DART-6UL with i.MX6ULL SOC, NAND flash & WiFi enabled. (eMMC & SD card disabled) |
imx6ul-var-dart-6ulcustomboard-emmc-sd-card.dtb | Device tree blob for DART-6UL with i.MX6UL SOC, eMMC & SD card enabled. (NAND flash & WiFi disabled) |
imx6ul-var-dart-6ulcustomboard-emmc-wifi.dtb | Device tree blob for DART-6UL with i.MX6UL SOC, eMMC & WiFi enabled. (NAND flash & SD card disabled) |
imx6ul-var-dart-6ulcustomboard-nand-sd-card.dtb | Device tree blob for DART-6UL with i.MX6UL SOC, NAND flash & SD card enabled. (eMMC & WiFi disabled) |
imx6ul-var-dart-6ulcustomboard-nand-wifi.dtb | Device tree blob for DART-6UL with i.MX6UL SOC, NAND flash & WiFi enabled. (eMMC & SD card disabled) |
imx6ulz-var-dart-6ulcustomboard-emmc-sd-card.dtb | Device tree blob for DART-6UL with i.MX6ULZ SOC, eMMC & SD card enabled. (NAND flash & WiFi disabled) |
imx6ulz-var-dart-6ulcustomboard-emmc-wifi.dtb | Device tree blob for DART-6UL with i.MX6ULZ SOC, eMMC & WiFi enabled. (NAND flash & SD card disabled) |
imx6ulz-var-dart-6ulcustomboard-nand-sd-card.dtb | Device tree blob for DART-6UL with i.MX6ULZ SOC, NAND flash & SD card enabled. (eMMC & WiFi disabled) |
imx6ulz-var-dart-6ulcustomboard-nand-wifi.dtb | Device tree blob for DART-6UL with i.MX6ULZ SOC, NAND flash & WiFi enabled. (eMMC & SD card disabled) |
imx6ull-var-som-concerto-board-emmc-sd-card.dtb | Device tree blob for VAR-SOM-6UL on Concerto board with i.MX6ULL SOC, eMMC & SD card enabled. (NAND flash & WiFi disabled) |
imx6ull-var-som-concerto-board-emmc-wifi.dtb | Device tree blob for VAR-SOM-6UL on Concerto board with i.MX6ULL SOC, eMMC & WiFi enabled. (NAND flash & SD card disabled) |
imx6ull-var-som-concerto-board-nand-sd-card.dtb | Device tree blob for VAR-SOM-6UL on Concerto board with i.MX6ULL SOC, NAND flash & SD card enabled. (eMMC & WiFi disabled) |
imx6ull-var-som-concerto-board-nand-wifi.dtb | Device tree blob for VAR-SOM-6UL on Concerto board with i.MX6ULL SOC, NAND flash & WiFi enabled. (eMMC & SD card disabled) |
imx6ul-var-som-concerto-board-emmc-sd-card.dtb | Device tree blob for VAR-SOM-6UL on Concerto board with i.MX6UL SOC, eMMC & SD card enabled. (NAND flash & WiFi disabled) |
imx6ul-var-som-concerto-board-emmc-wifi.dtb | Device tree blob for VAR-SOM-6UL on Concerto board with i.MX6UL SOC, eMMC & WiFi enabled. (NAND flash & SD card disabled) |
imx6ul-var-som-concerto-board-nand-sd-card.dtb | Device tree blob for VAR-SOM-6UL on Concerto board with i.MX6UL SOC, NAND flash & SD card enabled. (eMMC & WiFi disabled) |
imx6ul-var-som-concerto-board-nand-wifi.dtb | Device tree blob for VAR-SOM-6UL on Concerto board with i.MX6UL SOC, NAND flash & WiFi enabled. (eMMC & SD card disabled) |
imx6ulz-var-som-concerto-board-emmc-sd-card.dtb | Device tree blob for VAR-SOM-6UL on Concerto board with i.MX6ULZ SOC, eMMC & SD card enabled. (NAND flash & WiFi disabled) |
imx6ulz-var-som-concerto-board-emmc-wifi.dtb | Device tree blob for VAR-SOM-6UL on Concerto board with i.MX6ULZ SOC, eMMC & WiFi enabled. (NAND flash & SD card disabled) |
imx6ulz-var-som-concerto-board-nand-sd-card.dtb | Device tree blob for VAR-SOM-6UL on Concerto board with i.MX6ULZ SOC, NAND flash & SD card enabled. (eMMC & WiFi disabled) |
imx6ulz-var-som-concerto-board-nand-wifi.dtb | Device tree blob for VAR-SOM-6UL on Concerto board with i.MX6ULZ SOC, NAND flash & WiFi enabled. (eMMC & SD card disabled) |
imx6ull-var-som-symphony-board-emmc-sd-card.dtb | Device tree blob for VAR-SOM-6UL on Symphony board with i.MX6ULL SOC, eMMC & SD card enabled. (NAND flash & WiFi disabled) |
imx6ull-var-som-symphony-board-emmc-wifi.dtb | Device tree blob for VAR-SOM-6UL on Symphony board with i.MX6ULL SOC, eMMC & WiFi enabled. (NAND flash & SD card disabled) |
imx6ull-var-som-symphony-board-nand-sd-card.dtb | Device tree blob for VAR-SOM-6UL on Symphony board with i.MX6ULL SOC, NAND flash & SD card enabled. (eMMC & WiFi disabled) |
imx6ull-var-som-symphony-board-nand-wifi.dtb | Device tree blob for VAR-SOM-6UL on Symphony board with i.MX6ULL SOC, NAND flash & WiFi enabled. (eMMC & SD card disabled) |
imx6ul-var-som-symphony-board-emmc-sd-card.dtb | Device tree blob for VAR-SOM-6UL on Symphony board with i.MX6UL SOC, eMMC & SD card enabled. (NAND flash & WiFi disabled) |
imx6ul-var-som-symphony-board-emmc-wifi.dtb | Device tree blob for VAR-SOM-6UL on Symphony board with i.MX6UL SOC, eMMC & WiFi enabled. (NAND flash & SD card disabled) |
imx6ul-var-som-symphony-board-nand-sd-card.dtb | Device tree blob for VAR-SOM-6UL on Symphony board with i.MX6UL SOC, NAND flash & SD card enabled. (eMMC & WiFi disabled) |
imx6ul-var-som-symphony-board-nand-wifi.dtb | Device tree blob for VAR-SOM-6UL on Symphony board with i.MX6UL SOC, NAND flash & WiFi enabled. (eMMC & SD card disabled) |
imx6ulz-var-som-symphony-board-emmc-sd-card.dtb | Device tree blob for VAR-SOM-6UL on Symphony board with i.MX6ULZ SOC, eMMC & SD card enabled. (NAND flash & WiFi disabled) |
imx6ulz-var-som-symphony-board-emmc-wifi.dtb | Device tree blob for VAR-SOM-6UL on Symphony board with i.MX6ULZ SOC, eMMC & WiFi enabled. (NAND flash & SD card disabled) |
imx6ulz-var-som-symphony-board-nand-sd-card.dtb | Device tree blob for VAR-SOM-6UL on Symphony board with i.MX6ULZ SOC, NAND flash & SD card enabled. (eMMC & WiFi disabled) |
imx6ulz-var-som-symphony-board-nand-wifi.dtb | Device tree blob for VAR-SOM-6UL on Symphony board with i.MX6ULZ SOC, NAND flash & WiFi enabled. (eMMC & SD card disabled) |
SD card image file tree
/opt/images/ └── Debian ├── imx6ul-var-dart-5g-emmc_wifi.dtb ├── imx6ul-var-dart-5g-nand_wifi.dtb ├── imx6ul-var-dart-emmc_wifi.dtb ├── imx6ul-var-dart-nand_wifi.dtb ├── imx6ul-var-dart-sd_emmc.dtb ├── imx6ul-var-dart-sd_nand.dtb ├── imx6ull-var-dart-5g-emmc_wifi.dtb ├── imx6ull-var-dart-5g-nand_wifi.dtb ├── imx6ull-var-dart-emmc_wifi.dtb ├── imx6ull-var-dart-nand_wifi.dtb ├── imx6ull-var-dart-sd_emmc.dtb ├── imx6ull-var-dart-sd_nand.dtb ├── rootfs.tar.gz ├── rootfs.ubi.img ├── SPL.mmc ├── SPL.nand ├── u-boot.img.mmc ├── u-boot.img.nand └── zImage
/opt/images/ └── Yocto ├── imx6ull-var-dart-6ulcustomboard-emmc-sd-card.dtb ├── imx6ull-var-dart-6ulcustomboard-emmc-wifi.dtb ├── imx6ull-var-dart-6ulcustomboard-nand-sd-card.dtb ├── imx6ull-var-dart-6ulcustomboard-nand-wifi.dtb ├── imx6ull-var-som-concerto-board-emmc-sd-card.dtb ├── imx6ull-var-som-concerto-board-emmc-wifi.dtb ├── imx6ull-var-som-concerto-board-nand-sd-card.dtb ├── imx6ull-var-som-concerto-board-nand-wifi.dtb ├── imx6ul-var-dart-6ulcustomboard-emmc-sd-card.dtb ├── imx6ul-var-dart-6ulcustomboard-emmc-wifi.dtb ├── imx6ul-var-dart-6ulcustomboard-nand-sd-card.dtb ├── imx6ul-var-dart-6ulcustomboard-nand-wifi.dtb ├── imx6ul-var-som-concerto-board-emmc-sd-card.dtb ├── imx6ul-var-som-concerto-board-emmc-wifi.dtb ├── imx6ul-var-som-concerto-board-nand-sd-card.dtb ├── imx6ul-var-som-concerto-board-nand-wifi.dtb ├── imx6ulz-var-dart-6ulcustomboard-emmc-sd-card.dtb ├── imx6ulz-var-dart-6ulcustomboard-emmc-wifi.dtb ├── imx6ulz-var-dart-6ulcustomboard-nand-sd-card.dtb ├── imx6ulz-var-dart-6ulcustomboard-nand-wifi.dtb ├── imx6ulz-var-som-concerto-board-emmc-sd-card.dtb ├── imx6ulz-var-som-concerto-board-emmc-wifi.dtb ├── imx6ulz-var-som-concerto-board-nand-sd-card.dtb ├── imx6ulz-var-som-concerto-board-nand-wifi.dtb ├── rootfs.tar.gz ├── rootfs.ubi.img ├── SPL.mmc ├── SPL.nand ├── u-boot.img.mmc ├── u-boot.img.nand └── zImage
/opt/images/ └── Debian ├──imx6ull-var-dart-6ulcustomboard-emmc-sd-card.dtb ├──imx6ull-var-dart-6ulcustomboard-emmc-wifi.dtb ├──imx6ull-var-dart-6ulcustomboard-nand-sd-card.dtb ├──imx6ull-var-dart-6ulcustomboard-nand-wifi.dtb ├──imx6ull-var-som-concerto-board-emmc-sd-card.dtb ├──imx6ull-var-som-concerto-board-emmc-wifi.dtb ├──imx6ull-var-som-concerto-board-nand-sd-card.dtb ├──imx6ull-var-som-concerto-board-nand-wifi.dtb ├──imx6ull-var-som-symphony-board-emmc-sd-card.dtb ├──imx6ull-var-som-symphony-board-emmc-wifi.dtb ├──imx6ull-var-som-symphony-board-nand-sd-card.dtb ├──imx6ull-var-som-symphony-board-nand-wifi.dtb ├──imx6ul-var-dart-6ulcustomboard-emmc-sd-card.dtb ├──imx6ul-var-dart-6ulcustomboard-emmc-wifi.dtb ├──imx6ul-var-dart-6ulcustomboard-nand-sd-card.dtb ├──imx6ul-var-dart-6ulcustomboard-nand-wifi.dtb ├──imx6ul-var-som-concerto-board-emmc-sd-card.dtb ├──imx6ul-var-som-concerto-board-emmc-wifi.dtb ├──imx6ul-var-som-concerto-board-nand-sd-card.dtb ├──imx6ul-var-som-concerto-board-nand-wifi.dtb ├──imx6ul-var-som-symphony-board-emmc-sd-card.dtb ├──imx6ul-var-som-symphony-board-emmc-wifi.dtb ├──imx6ul-var-som-symphony-board-nand-sd-card.dtb ├──imx6ul-var-som-symphony-board-nand-wifi.dtb ├──imx6ulz-var-dart-6ulcustomboard-emmc-sd-card.dtb ├──imx6ulz-var-dart-6ulcustomboard-emmc-wifi.dtb ├──imx6ulz-var-dart-6ulcustomboard-nand-sd-card.dtb ├──imx6ulz-var-dart-6ulcustomboard-nand-wifi.dtb ├──imx6ulz-var-som-concerto-board-emmc-sd-card.dtb ├──imx6ulz-var-som-concerto-board-emmc-wifi.dtb ├──imx6ulz-var-som-concerto-board-nand-sd-card.dtb ├──imx6ulz-var-som-concerto-board-nand-wifi.dtb ├──imx6ulz-var-som-symphony-board-emmc-sd-card.dtb ├──imx6ulz-var-som-symphony-board-emmc-wifi.dtb ├──imx6ulz-var-som-symphony-board-nand-sd-card.dtb ├──imx6ulz-var-som-symphony-board-nand-wifi.dtb ├── rootfs.tar.gz ├── rootfs.ubi.img ├── SPL.mmc ├── SPL.nand ├── u-boot.img.mmc ├── u-boot.img.nand └── zImage
VAR-SOM-MX7
Build Results
The resulted images are located in /output/.
Image name |
How to use |
---|---|
rootfs.tar.gz | Root filesystem tarball used for installation on SD card and eMMC |
rootfs.ubi.img | Use for flash to nand |
zImage | Linux kernel image |
SPL.nand | SPL built for NAND. The SPL is pre-U-Boot SW component, required for DDR initialization |
SPL.emmc | SPL built for SD card and eMMC boot. The SPL is pre-U-Boot SW component, required for DDR initialization |
u-boot.img.nand | U-Boot built for NAND flash |
u-boot.img.emmc | U-Boot built for SD card or eMMC boot |
Device Tree name |
Details |
imx7d-var-som-emmc.dtb | Boot from SD or eMMC |
imx7d-var-som-nand.dtb | Boot from NAND |
imx7d-var-som-emmc-m4.dtb | Boot from SD or eMMC with M4 support |
imx7d-var-som-nand-m4.dtb | Boot from NAND with M4 support |
The resulted images are located in /output/.
Image name |
How to use |
---|---|
rootfs.tar.gz | Root filesystem tarball used for installation on SD card and eMMC |
rootfs.ubi.img | Use for flash to nand |
zImage | Linux kernel image |
SPL.nand | SPL built for NAND. The SPL is pre-U-Boot SW component, required for DDR initialization |
SPL.mmc | SPL built for SD card and eMMC boot. The SPL is pre-U-Boot SW component, required for DDR initialization |
u-boot.img.nand | U-Boot built for NAND flash |
u-boot.img.mmc | U-Boot built for SD card or eMMC boot |
Device Tree name |
Details |
imx7d-var-som-emmc.dtb | Boot from SD or eMMC |
imx7d-var-som-nand.dtb | Boot from NAND |
imx7d-var-som-emmc-m4.dtb | Boot from SD or eMMC with M4 support |
imx7d-var-som-nand-m4.dtb | Boot from NAND with M4 support |
DART-MX8M
Build Results
The resulted images are located in /output/.
Image name |
How to use |
---|---|
rootfs.tar.gz | Root filesystem tarball used for installation on SD card and eMMC |
Image.gz | Linux kernel image |
imx-boot-sd.bin | U-Boot built for SD card and eMMC |
Device Tree name |
Details |
fsl-imx8mq-var-dart-emmc-wifi-dual-display.dtb | DART-MX8M with HDMI+LVDS, eMMC and WiFi (SD card disabled) |
fsl-imx8mq-var-dart-emmc-wifi-hdmi.dtb | DART-MX8M with HDMI, eMMC and WiFi (SD card disabled) |
fsl-imx8mq-var-dart-emmc-wifi-lvds.dtb | DART-MX8M with LVDS, eMMC and WiFi (SD card disabled) |
fsl-imx8mq-var-dart-sd-emmc-dual-display.dtb | DART-MX8M with HDMI+LVDS, eMMC and SD (WiFi card disabled) |
fsl-imx8mq-var-dart-sd-emmc-hdmi.dtb | DART-MX8M with HDMI, eMMC and SD (WiFi card disabled) |
fsl-imx8mq-var-dart-sd-emmc-lvds.dtb | DART-MX8M with LVDS, eMMC and SD (WiFi card disabled) |
The resulted images are located in /output/.
Image name |
How to use | |
---|---|---|
rootfs.tar.gz | Root filesystem tarball used for installation on SD card and eMMC | |
Image.gz | Linux kernel image | |
imx-boot-sd.bin | U-Boot built for SD card and eMMC | |
Device Tree name |
Details | |
fsl-imx8mq-var-dart-emmc-wifi-hdmi.dtb | DART-MX8M with eMMC, WIFI and HDMI display configuration on carrier board revisions 1.3 and higher.(SD card disabled) | |
fsl-imx8mq-var-dart-emmc-wifi-lvds.dtb | DART-MX8M with eMMC, WIFI and LVDS display configuration on carrier board revisions 1.3 and higher. (SD card disabled) | |
fsl-imx8mq-var-dart-emmc-wifi-dual-display.dtb | DART-MX8M with eMMC, WIFI and dual LVDS+HDMI display configuration on carrier board revisions 1.3 and higher. (SD card disabled) | |
fsl-imx8mq-var-dart-emmc-wifi-hdmi-cb12.dtb | DART-MX8M with eMMC, WIFI and HDMI display configuration on carrier board revisions 1.1 and 1.2. (SD card disabled) | |
fsl-imx8mq-var-dart-emmc-wifi-lvds-cb12.dtb | DART-MX8M with eMMC, WIFI and LVDS display configuration on carrier board revisions 1.1 and 1.2. (SD card disabled) | |
fsl-imx8mq-var-dart-emmc-wifi-dual-display-cb12.dtb | DART-MX8M with eMMC, WIFI and dual LVDS+HDMI display configuration on carrier board revisions 1.1 and 1.2. (SD card disabled) | |
fsl-imx8mq-var-dart-sd-emmc-hdmi.dtb | DART-MX8M with SD, eMMC and HDMI display configuration on carrier board revisions 1.3 and higher. (WIFI disabled) | |
fsl-imx8mq-var-dart-sd-emmc-lvds.dtb | DART-MX8M with SD, eMMC and LCDIF LVDS display configuration on carrier board revisions 1.3 and higher. (WIFI disabled) | |
fsl-imx8mq-var-dart-sd-emmc-dual-display.dtb | DART-MX8M with SD, eMMC and dual LVDS+HDMI display configuration on carrier board revisions 1.3 and higher. (WIFI disabled) | |
fsl-imx8mq-var-dart-sd-emmc-hdmi-cb12.dtb | DART-MX8M with SD, eMMC and HDMI display configuration on carrier board revisions 1.1 and 1.2. (WIFI disabled) | |
fsl-imx8mq-var-dart-sd-emmc-lvds-cb12.dtb | DART-MX8M with SD, eMMC and LCDIF LVDS display configuration on carrier board revisions 1.1 and 1.2. (WIFI disabled) | |
fsl-imx8mq-var-dart-sd-emmc-dual-display-cb12.dtb | DART-MX8M with SD, eMMC and dual LVDS+HDMI display configuration on carrier board revisions 1.1 and 1.2. (WIFI disabled) | |
fsl-imx8mq-var-dart-m4-emmc-wifi-hdmi.dtb | DART-MX8M with M4 eMMC, WIFI and HDMI display configuration on carrier board revisions 1.3 and higher.(SD card disabled) | |
fsl-imx8mq-var-dart-m4-emmc-wifi-lvds.dtb | DART-MX8M with M4 eMMC, WIFI and LVDS display configuration on carrier board revisions 1.3 and higher. (SD card disabled) | |
fsl-imx8mq-var-dart-m4-emmc-wifi-dual-display.dtb | DART-MX8M with M4 eMMC, WIFI and dual LVDS+HDMI display configuration on carrier board revisions 1.3 and higher. (SD card disabled) | |
fsl-imx8mq-var-dart-m4-emmc-wifi-hdmi-cb12.dtb | DART-MX8M with M4 eMMC, WIFI and HDMI display configuration on carrier board revisions 1.1 and 1.2. (SD card disabled) | |
fsl-imx8mq-var-dart-m4-emmc-wifi-lvds-cb12.dtb | DART-MX8M with M4 eMMC, WIFI and LVDS display configuration on carrier board revisions 1.1 and 1.2. (SD card disabled) | |
fsl-imx8mq-var-dart-m4-emmc-wifi-dual-display-cb12.dtb | DART-MX8M with M4 eMMC, WIFI and dual LVDS+HDMI display configuration on carrier board revisions 1.1 and 1.2. (SD card disabled) | |
fsl-imx8mq-var-dart-m4-sd-emmc-hdmi.dtb | DART-MX8M with M4 SD, eMMC and HDMI display configuration on carrier board revisions 1.3 and higher. (WIFI disabled) | |
fsl-imx8mq-var-dart-m4-sd-emmc-lvds.dtb | DART-MX8M with M4 SD, eMMC and LCDIF LVDS display configuration on carrier board revisions 1.3 and higher. (WIFI disabled) | |
fsl-imx8mq-var-dart-m4-sd-emmc-dual-display.dtb | DART-MX8M with M4 SD, eMMC and dual LVDS+HDMI display configuration on carrier board revisions 1.3 and higher. (WIFI disabled) | |
fsl-imx8mq-var-dart-m4-sd-emmc-hdmi-cb12.dtb | DART-MX8M with M4 SD, eMMC and HDMI display configuration on carrier board revisions 1.1 and 1.2. (WIFI disabled) | |
fsl-imx8mq-var-dart-m4-sd-emmc-lvds-cb12.dtb | DART-MX8M with M4 SD, eMMC and LCDIF LVDS display configuration on carrier board revisions 1.1 and 1.2. (WIFI disabled) | |
fsl-imx8mq-var-dart-m4-sd-emmc-dual-display-cb12.dtb | DART-MX8M with M4 SD, eMMC and dual LVDS+HDMI display configuration on carrier board revisions 1.1 and 1.2. (WIFI disabled) |
The resulted images are located in /output/.
Image name |
How to use |
---|---|
rootfs.tar.gz | Root filesystem tarball used for installation on SD card and eMMC |
Image.gz | Linux kernel image |
imx-boot-sd.bin | U-Boot built for SD card and eMMC |
imx-boot-sd-dp.bin | U-Boot built for SD card and eMMC with DP firmware |
Device Tree name |
Details |
fsl-imx8mq-var-dart-sd-dp.dtb | DTB for eMMC, SD and DP display configuration on carrier board revisions 1.3 and higher. |
fsl-imx8mq-var-dart-sd-hdmi.dtb | DTB for eMMC, SD and HDMI display configuration on carrier board revisions 1.3 and higher. |
fsl-imx8mq-var-dart-sd-lvds.dtb | DTB for eMMC, SD and LVDS display configuration on carrier board revisions 1.3 and higher. |
fsl-imx8mq-var-dart-sd-lvds-dp.dtb | DTB for eMMC, SD and dual LVDS+DP display configuration on carrier board revisions 1.3 and higher. |
fsl-imx8mq-var-dart-sd-lvds-hdmi.dtb | DTB for eMMC, SD and dual LVDS+HDMI display configuration on carrier board revisions 1.3 and higher. |
fsl-imx8mq-var-dart-sd-hdmi-cb12.dtb | DTB for eMMC, SD and HDMI display configuration on carrier board revisions 1.1 and 1.2. |
fsl-imx8mq-var-dart-sd-lvds-cb12.dtb | DTB for eMMC, SD and LVDS display configuration on carrier board revisions 1.1 and 1.2. |
fsl-imx8mq-var-dart-sd-lvds-hdmi-cb12.dtb | DTB for eMMC, SD and dual LVDS+HDMI display configuration on carrier board revisions 1.1 and 1.2. |
fsl-imx8mq-var-dart-wifi-dp.dtb | DTB for eMMC, WIFI and DP display configuration on carrier board revisions 1.3 and higher. |
fsl-imx8mq-var-dart-wifi-hdmi.dtb | DTB for eMMC, WIFI and HDMI display configuration on carrier board revisions 1.3 and higher. |
fsl-imx8mq-var-dart-wifi-lvds.dtb | DTB for eMMC, WIFI and LVDS display configuration on carrier board revisions 1.3 and higher. |
fsl-imx8mq-var-dart-wifi-lvds-dp.dtb | DTB for eMMC, WIFI and dual LVDS+DP display configuration on carrier board revisions 1.3 and higher. |
fsl-imx8mq-var-dart-wifi-lvds-hdmi.dtb | DTB for eMMC, WIFI and dual LVDS+HDMI display configuration on carrier board revisions 1.3 and higher. |
fsl-imx8mq-var-dart-wifi-hdmi-cb12.dtb | DTB for eMMC, WIFI and HDMI display configuration on carrier board revisions 1.1 and 1.2. |
fsl-imx8mq-var-dart-wifi-lvds-cb12.dtb | DTB for eMMC, WIFI and LVDS display configuration on carrier board revisions 1.1 and 1.2. |
fsl-imx8mq-var-dart-wifi-lvds-hdmi-cb12.dtb | DTB for eMMC, WIFI and dual LVDS+HDMI display configuration on carrier board revisions 1.1 and 1.2. |
fsl-imx8mq-var-dart-m4-sd-dp.dtb | DTB for M4, eMMC, SD and DP display configuration on carrier board revisions 1.3 and higher. |
fsl-imx8mq-var-dart-m4-sd-hdmi.dtb | DTB for M4, eMMC, SD and HDMI display configuration on carrier board revisions 1.3 and higher. |
fsl-imx8mq-var-dart-m4-sd-lvds.dtb | DTB for M4, eMMC, SD and LVDS display configuration on carrier board revisions 1.3 and higher. |
fsl-imx8mq-var-dart-m4-sd-lvds-dp.dtb | DTB for M4, eMMC, SD and dual LVDS+DP display configuration on carrier board revisions 1.3 and higher. |
fsl-imx8mq-var-dart-m4-sd-lvds-hdmi.dtb | DTB for M4, eMMC, SD and dual LVDS+HDMI display configuration on carrier board revisions 1.3 and higher. |
fsl-imx8mq-var-dart-m4-sd-hdmi-cb12.dtb | DTB for M4, eMMC, SD and HDMI display configuration on carrier board revisions 1.1 and 1.2. |
fsl-imx8mq-var-dart-m4-sd-lvds-cb12.dtb | DTB for M4, eMMC, SD and LVDS display configuration on carrier board revisions 1.1 and 1.2. |
fsl-imx8mq-var-dart-m4-sd-lvds-hdmi-cb12.dtb | DTB for M4, eMMC, SD and dual LVDS+HDMI display configuration on carrier board revisions 1.1 and 1.2. |
fsl-imx8mq-var-dart-m4-wifi-dp.dtb | DTB for M4, eMMC, WIFI and DP display configuration on carrier board revisions 1.3 and higher. |
fsl-imx8mq-var-dart-m4-wifi-hdmi.dtb | DTB for M4, eMMC, WIFI and HDMI display configuration on carrier board revisions 1.3 and higher. |
fsl-imx8mq-var-dart-m4-wifi-lvds.dtb | DTB for M4, eMMC, WIFI and LVDS display configuration on carrier board revisions 1.3 and higher. |
fsl-imx8mq-var-dart-m4-wifi-lvds-dp.dtb | DTB for M4, eMMC, WIFI and dual LVDS+DP display configuration on carrier board revisions 1.3 and higher. |
fsl-imx8mq-var-dart-m4-wifi-lvds-hdmi.dtb | DTB for M4, eMMC, WIFI and dual LVDS+HDMI display configuration on carrier board revisions 1.3 and higher. |
fsl-imx8mq-var-dart-m4-wifi-hdmi-cb12.dtb | DTB for M4, eMMC, WIFI and HDMI display configuration on carrier board revisions 1.1 and 1.2. |
fsl-imx8mq-var-dart-m4-wifi-lvds-cb12.dtb | DTB for M4, eMMC, WIFI and LVDS display configuration on carrier board revisions 1.1 and 1.2. |
fsl-imx8mq-var-dart-m4-wifi-lvds-hdmi-cb12.dtb | DTB for M4, eMMC, WIFI and dual LVDS+HDMI display configuration on carrier board revisions 1.1 and 1.2. |
The resulted images are located in /output/.
Image name |
How to use |
---|---|
rootfs.tar.gz | Root filesystem tarball used for installation on SD card and eMMC |
Image.gz | Linux kernel image |
imx-boot-sd.bin | U-Boot built for SD card and eMMC |
imx-boot-sd-dp.bin | U-Boot built for SD card and eMMC with DP firmware |
kernel-headers | kernel headers folder for package creation |
Device Tree name |
Details |
imx8mq-var-dart-dt8mcustomboard-sd-hdmi.dtb | DTB for DART-MX8M on DT8MCustomBoard V2.x with SD card and HDMI display. |
imx8mq-var-dart-dt8mcustomboard-sd-lvds.dtb | DTB for DART-MX8M on DT8MCustomBoard V2.x with SD card and LVDS display. |
imx8mq-var-dart-dt8mcustomboard-sd-lvds-hdmi.dtb | DTB for DART-MX8M on DT8MCustomBoard V2.x with SD card and dual LVDS+HDMI display. |
imx8mq-var-dart-dt8mcustomboard-wifi-hdmi.dtb | DTB for DART-MX8M on DT8MCustomBoard V2.x with WIFI and HDMI display. |
imx8mq-var-dart-dt8mcustomboard-wifi-lvds.dtb | DTB for DART-MX8M on DT8MCustomBoard V2.x with WIFI and LVDS display. |
imx8mq-var-dart-dt8mcustomboard-wifi-lvds-hdmi.dtb | DTB for DART-MX8M on DT8MCustomBoard V2.x with WIFI and dual LVDS+HDMI display. |
imx8mq-var-dart-dt8mcustomboard-m4-sd-hdmi.dtb | DTB for DART-MX8M on DT8MCustomBoard V2.x with M4, SD card and HDMI display. |
imx8mq-var-dart-dt8mcustomboard-m4-sd-lvds.dtb | DTB for DART-MX8M on DT8MCustomBoard V2.x with M4, SD card and LVDS display. |
imx8mq-var-dart-dt8mcustomboard-m4-sd-lvds-hdmi.dtb | DTB for DART-MX8M on DT8MCustomBoard V2.x with M4, SD card and dual LVDS+HDMI display. |
imx8mq-var-dart-dt8mcustomboard-m4-wifi-hdmi.dtb | DTB for DART-MX8M on DT8MCustomBoard V2.x with M4, WIFI and HDMI display. |
imx8mq-var-dart-dt8mcustomboard-m4-wifi-lvds.dtb | DTB for DART-MX8M on DT8MCustomBoard V2.x with M4, WIFI and LVDS display. |
imx8mq-var-dart-dt8mcustomboard-m4-wifi-lvds-hdmi.dtb | DTB for DART-MX8M on DT8MCustomBoard V2.x with M4, WIFI and dual LVDS+HDMI display. |
imx8mq-var-dart-dt8mcustomboard-legacy-sd-dp.dtb | DTB for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with SD card and DP display. |
imx8mq-var-dart-dt8mcustomboard-legacy-sd-hdmi.dtb | DTB for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with SD card and HDMI display. |
imx8mq-var-dart-dt8mcustomboard-legacy-sd-lvds.dtb | DTB for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with SD card and LVDS display. |
imx8mq-var-dart-dt8mcustomboard-legacy-sd-lvds-dp.dtb | DTB for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with SD card and dual LVDS+DP display. |
imx8mq-var-dart-dt8mcustomboard-legacy-sd-lvds-hdmi.dtb | DTB for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with SD card and dual LVDS+HDMI display. |
imx8mq-var-dart-dt8mcustomboard-legacy-wifi-dp.dtb | DTB for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with WIFI and DP display. |
imx8mq-var-dart-dt8mcustomboard-legacy-wifi-hdmi.dtb | DTB for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with WIFI and HDMI display. |
imx8mq-var-dart-dt8mcustomboard-legacy-wifi-lvds.dtb | DTB for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with WIFI and LVDS display. |
imx8mq-var-dart-dt8mcustomboard-legacy-wifi-lvds-dp.dtb | DTB for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with WIFI and dual LVDS+DP display. |
imx8mq-var-dart-dt8mcustomboard-legacy-wifi-lvds-hdmi.dtb | DTB for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with WIFI and dual LVDS+HDMI display. |
imx8mq-var-dart-dt8mcustomboard-legacy-m4-sd-dp.dtb | DTB for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with M4, SD card and DP display. |
imx8mq-var-dart-dt8mcustomboard-legacy-m4-sd-hdmi.dtb | DTB for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with M4, SD card and HDMI display. |
imx8mq-var-dart-dt8mcustomboard-legacy-m4-sd-lvds.dtb | DTB for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with M4, SD card and LVDS display. |
imx8mq-var-dart-dt8mcustomboard-legacy-m4-sd-lvds-dp.dtb | DTB for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with M4, SD card and dual LVDS+DP display. |
imx8mq-var-dart-dt8mcustomboard-legacy-m4-sd-lvds-hdmi.dtb | DTB for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with M4, SD card and dual LVDS+HDMI display. |
imx8mq-var-dart-dt8mcustomboard-legacy-m4-wifi-dp.dtb | DTB for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with M4, WIFI and DP display. |
imx8mq-var-dart-dt8mcustomboard-legacy-m4-wifi-hdmi.dtb | DTB for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with M4, WIFI and HDMI display. |
imx8mq-var-dart-dt8mcustomboard-legacy-m4-wifi-lvds.dtb | DTB for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with M4, WIFI and LVDS display. |
imx8mq-var-dart-dt8mcustomboard-legacy-m4-wifi-lvds-dp.dtb | DTB for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with M4, WIFI and dual LVDS+DP display. |
imx8mq-var-dart-dt8mcustomboard-legacy-m4-wifi-lvds-hdmi.dtb | DTB for DART-MX8M on DT8MCustomBoard V1.3/V1.4 with M4, WIFI and dual LVDS+HDMI display. |
DART-MX8M-MINI
Build Results
The resulted images are located in /output/.
Image name |
How to use |
---|---|
rootfs.tar.gz | Root filesystem tarball used for installation on SD card and eMMC |
Image.gz | Linux kernel image |
imx-boot-sd.bin | U-Boot built for SD card and eMMC |
Device Tree name |
Details |
fsl-imx8mm-var-dart.dtb | Device tree blob for SD, eMMC, WIFI and LVDS display configuration. |
The resulted images are located in /output/.
Image name |
How to use |
---|---|
rootfs.tar.gz | Root filesystem tarball used for installation on SD card and eMMC |
Image.gz | Linux kernel image |
imx-boot-sd.bin | U-Boot built for SD card and eMMC |
Device Tree name |
Details |
fsl-imx8mm-var-dart.dtb | Device tree blob for SD, eMMC, WIFI and LVDS display configuration. |
fsl-imx8mm-var-som.dtb | Device tree blob for VAR-SOM-MX8M-MINI, for SD, eMMC, WIFI and LVDS display configuration. |
fsl-imx8mm-var-som-rev10.dtb | Device tree blob for VAR-SOM-MX8M-MINI Rev 1.0 , for SD, eMMC, WIFI and LVDS display configuration. |
fsl-imx8mm-var-dart-m4.dtb | Device tree blob for SD, eMMC, WIFI and LVDS display configuration and m4 support. |
fsl-imx8mm-var-som-m4.dtb | Device tree blob for VAR-SOM-MX8M-MINI, for SD, eMMC, WIFI and LVDS display configuration and m4 support. |
fsl-imx8mm-var-som-rev10.dtb | Device tree blob for VAR-SOM-MX8M-MINI Rev 1.0 , for SD, eMMC, WIFI and LVDS display configuration and m4 support. |
The resulted images are located in /output/.
Image name |
How to use |
---|---|
rootfs.tar.gz | Root filesystem tarball used for installation on SD card and eMMC |
Image.gz | Linux kernel image |
imx-boot-sd.bin | U-Boot built for SD card and eMMC |
fw_printenv | U-Boot env tools for SD card and eMMC |
Folder Name |
Usage |
kernel-headers | kernel headers folder for package creation |
Device Tree name |
Details |
imx8mm-var-dart.dtb | Device tree blob for SD, eMMC, WIFI and LVDS display configuration. |
imx8mm-var-som.dtb | Device tree blob for VAR-SOM-MX8M-MINI, for SD, eMMC, WIFI and LVDS display configuration. |
imx8mm-var-som-rev10.dtb | Device tree blob for VAR-SOM-MX8M-MINI Rev 1.0 , for SD, eMMC, WIFI and LVDS display configuration. |
imx8mm-var-dart-m4.dtb | Device tree blob for SD, eMMC, WIFI and LVDS display configuration and m4 support. |
imx8mm-var-som-m4.dtb | Device tree blob for VAR-SOM-MX8M-MINI, for SD, eMMC, WIFI and LVDS display configuration and m4 support. |
imx8mm-var-som-rev10.dtb | Device tree blob for VAR-SOM-MX8M-MINI Rev 1.0 , for SD, eMMC, WIFI and LVDS display configuration and m4 support. |
The resulted images are located in /output/.
Image name |
How to use |
---|---|
rootfs.tar.gz | Root filesystem tarball used for installation on SD card and eMMC |
Image.gz | Linux kernel image |
imx-boot-sd.bin | U-Boot built for SD card and eMMC |
fw_printenv | U-Boot env tools for SD card and eMMC |
Folder Name |
Usage |
kernel-headers | kernel headers folder for package creation |
Device Tree name |
Details |
mx8mm-var-dart-dt8mcustomboard.dtb | Device tree blob for DART-MX8M-MINI on DT8MCustomBoard V2.x |
imx8mm-var-dart-dt8mcustomboard-m4.dtb | Device tree blob for DART-MX8M-MINI with Cortex-M4 on DT8MCustomBoard V2.x |
imx8mm-var-dart-dt8mcustomboard-legacy.dtb | Device tree blob for DART-MX8M-MINI on DT8MCustomBoard V1.x |
imx8mm-var-dart-dt8mcustomboard-legacy-m4.dtb | Device tree blob for DART-MX8M-MINI with Cortex-M4 on DT8MCustomBoard V1.x |
imx8mm-var-som-symphony.dtb | Device tree blob for VAR-SOM-MX8M-MINI on Symphony-Board V1.4A and above |
imx8mm-var-som-symphony-m4.dtb | Device tree blob for VAR-SOM-MX8M-MINI with Cortex-M4 on Symphony-Board V1.4A and above |
imx8mm-var-som-symphony-legacy.dtb | Device tree blob for VAR-SOM-MX8M-MINI on Symphony-Board V1.4 and below |
imx8mm-var-som-symphony-legacy-m4.dtb | Device tree blob for VAR-SOM-MX8M-MINI with Cortex-M4 on Symphony-Board V1.4 and below |
DART-MX8M-PLUS
Build Results
The resulted images are located in /output/.
Image name |
How to use |
---|---|
rootfs.tar.gz | Root filesystem tarball used for installation on SD card and eMMC |
Image.gz | Linux kernel image |
imx-boot-sd.bin | U-Boot built for SD card and eMMC |
Device Tree name |
Details |
imx8mp-var-dart-dt8mcustomboard.dtb | Device tree blob for DART-MX8M-PLUS on DT8MCustomBoard V2.x |
imx8mp-var-dart-dt8mcustomboard-legacy.dtb | Device tree blob for DART-MX8M-PLUS on DT8MCustomBoard V1.x |
imx8mp-var-dart-symphony.dtb | Device tree blob for VAR-SOM-MX8M-PLUS on Symphony-Board |
imx8mp-var-dart-symphony-2nd-ov5640.dtb | Device tree blob for VAR-SOM-MX8M-PLUS on Symphony-Board with a 2nd OV5640 camera |
Build Results
The resulted images are located in /output/.
Image name |
How to use |
---|---|
rootfs.tar.gz | Root filesystem tarball used for installation on SD card and eMMC |
Image.gz | Linux kernel image |
imx-boot-sd.bin | U-Boot built for SD card and eMMC |
Device Tree name |
Details |
imx8mp-var-dart-dt8mcustomboard.dtb | Device tree blob for DART-MX8M-PLUS on DT8MCustomBoard V2.x |
imx8mp-var-dart-dt8mcustomboard-legacy.dtb | Device tree blob for DART-MX8M-PLUS on DT8MCustomBoard V1.x |
imx8mp-var-dart-symphony.dtb | Device tree blob for VAR-SOM-MX8M-PLUS on Symphony-Board |
imx8mp-var-dart-symphony-2nd-ov5640.dtb | Device tree blob for VAR-SOM-MX8M-PLUS on Symphony-Board with a 2nd OV5640 camera |
imx8mp-var-dart-dt8mcustomboard-m7.dtb | Device tree blob for DART-MX8M-PLUS with Cortex-M7 on DT8MCustomBoard V2.x |
imx8mp-var-dart-dt8mcustomboard-legacy-m7.dtb | Device tree blob for DART-MX8M-PLUS with Cortex-M7 on DT8MCustomBoard V1.x |
imx8mp-var-dart-symphony-m7.dtb | Device tree blob for VAR-SOM-MX8M-PLUS with Cortex-M7 on Symphony-Board |
imx8mp-var-dart-symphony-2nd-ov5640-m7.dtb | Device tree blob for VAR-SOM-MX8M-PLUS with Cortex-M7 on Symphony-Board with a 2nd OV5640 camera |
VAR-SOM-MX8X
Build Results
The resulted images are located in /output/.
Image name |
How to use |
---|---|
rootfs.tar.gz | Root filesystem tarball used for installation on SD card and eMMC |
Image.gz | Linux kernel image |
imx-boot-sd.bin | U-Boot built for SD card and eMMC |
Device Tree name |
Details |
fsl-imx8qxp-var-som-wifi.dtb | Device tree blob for eMMC, WIFI and LVDS display configuration. |
fsl-imx8qxp-var-som-sd.dtb | Device tree blob for SD, eMMC and LVDS display configuration. |
The resulted images are located in /output/.
Image name |
How to use |
---|---|
rootfs.tar.gz | Root filesystem tarball used for installation on SD card and eMMC |
Image.gz | Linux kernel image |
imx-boot-sd.bin | U-Boot built for SD card and eMMC |
imx-boot-sd-b0.bin | U-Boot built for Soc Rev B0 SD card and eMMC |
Device Tree name |
Details |
fsl-imx8qxp-var-som-wifi.dtb | Device tree blob for eMMC, WIFI and LVDS display configuration. |
fsl-imx8qxp-var-som-sd.dtb | Device tree blob for SD, eMMC and LVDS display configuration. |
The resulted images are located in /output/.
Image name |
How to use |
---|---|
rootfs.tar.gz | Root filesystem tarball used for installation on SD card and eMMC |
Image.gz | Linux kernel image |
imx-boot-sd.bin | U-Boot built for SD card and eMMC |
imx-boot-sd-b0.bin | U-Boot built for Soc Rev B0 SD card and eMMC |
Device Tree name |
Details |
imx8qxp-var-som-symphony-wifi.dtb | Device tree blob for eMMC, WIFI and LVDS display configuration. |
imx8qxp-var-som-symphony-sd.dtb | Device tree blob for SD, eMMC and LVDS display configuration. |
imx8qxp-var-som-symphony-wifi-m4.dtb | Device tree blob for eMMC, WIFI, LVDS display and M4 configuration. |
imx8qxp-var-som-symphony-sd-m4.dtb | Device tree blob for SD, eMMC, LVDS display and M4 configuration. |
VAR-SOM-MX8
Build Results
The resulted images are located in /output/.
Image name |
How to use |
---|---|
rootfs.tar.gz | Root filesystem tarball used for installation on SD card and eMMC |
Image.gz | Linux kernel image |
imx-boot-sd.bin | U-Boot built for SD card and eMMC |
Device Tree name |
Details |
fsl-imx8qm-var-som-dp.dtb | Device tree blob for VAR-SOM-MX8 with DP display |
fsl-imx8qm-var-som-hdmi.dtb | Device tree blob for VAR-SOM-MX8 with HDMI display |
fsl-imx8qm-var-som-lvds.dtb | Device tree blob for VAR-SOM-MX8 with LVDS display |
fsl-imx8qm-var-spear-dp.dtb | Device tree blob for SPEAR-MX8 with DP display |
fsl-imx8qm-var-spear-hdmi.dtb | Device tree blob for SPEAR-MX8 with HDMI display |
fsl-imx8qm-var-spear-lvds.dtb | Device tree blob for SPEAR-MX8 with LVDS display |
VAR-SOM-MX8M-NANO
Build Results
The resulted images are located in /output/.
Image name |
How to use |
---|---|
rootfs.tar.gz | Root filesystem tarball used for installation on SD card and eMMC |
Image.gz | Linux kernel image |
imx-boot-sd.bin | U-Boot built for SD card and eMMC |
Device Tree name |
Details |
fsl-imx8mn-var-som.dtb | Device tree blob for SD, eMMC, WIFI and LVDS display configuration. |
fsl-imx8mn-var-som-rev10.dtb | Device tree blob for SD, eMMC, WIFI and LVDS display configuration rev 1.0. |
fsl-imx8mn-var-som-m7.dtb | Device tree blob for M7, SD, eMMC, WIFI and LVDS display configuration. |
fsl-imx8mn-var-som-rev10-m7.dtb | Device tree blob for M7, SD, eMMC, WIFI and LVDS display configuration rev 1.0. |
The resulted images are located in /output/.
Image name |
How to use |
---|---|
rootfs.tar.gz | Root filesystem tarball used for installation on SD card and eMMC |
Image.gz | Linux kernel image |
imx-boot-sd.bin | U-Boot built for SD card and eMMC |
kernel-headers | kernel headers folder for package creation |
Device Tree name |
Details |
imx8mn-var-som-symphony.dtb | Device tree for VAR-SOM-MX8M-MINI on Symphony-Board V1.4A and above |
imx8mn-var-som-symphony-m7.dtb | Device tree for VAR-SOM-MX8M-MINI with Cortex-M7 on Symphony-Board V1.4A and above |
imx8mn-var-som-symphony-legacy.dtb | Device tree for VAR-SOM-MX8M-MINI on Symphony-Board V1.4 and below |
imx8mn-var-som-symphony-legacy-m7.dtb | Device tree for VAR-SOM-MX8M-MINI with Cortex-M7 on Symphony-Board V1.4 and below |
Release Notes
Platform Customizations
VAR-SOM-MX6
stretch-4.9.11-mx6-v1.0
stretch-4.9.88-mx6-v2.0
DART-6UL
stretch-4.9.11-mx6ul-v1.0
stretch-4.9.88-mx6ul-v2.0
stretch-4.14.78-mx6ul-v1.0
buster-4.14.78-mx6ul-v1.0
buster-4.14.78-mx6ul-v1.1
bullseye-5.4.142-mx6ul-v1.0
VAR-SOM-MX7
stretch-4.9.88-mx7-v2.0
buster-4.14.78-mx7-v1.0
buster-4.14.78-mx7-v1.1
buster-4.14.78-mx7-v1.2
bullseye-5.4.142-mx7-v1.0
bullseye-5.4.142-mx7-v1.1
DART-MX8M
stretch-4.14.78-mx8m-v1.0
buster-4.14.78-mx8m-v2.0
buster-4.14.78-mx8m-v2.1
buster-4.14.78-mx8m-v2.2
buster-4.14.78-mx8m-v2.3
buster-4.19.35-mx8mq-v3.0
buster-4.19.35-mx8mq-v3.1
bullseye-5.4.85-mx8mq-v1.0
bullseye-5.4.85-mx8mq-v1.1
bullseye-5.4.142-mx8mq-v1.2
bullseye-5.4.142-mx8mq-v1.3
DART-MX8M-MINI
Common Variables
Common Before
Common After
buster-4.14.78-mx8mm-v1.0
buster-4.14.78-mx8mm-v1.1
buster-4.14.78-mx8mm-v1.2
buster-4.14.78-mx8mm-v1.3
buster-4.19.35-mx8mm-v2.0
buster-4.19.35-mx8mm-v2.1
bullseye-5.4.3-mx8mm-v1.0
mx8mm-debian-bullseye-5.4-2.1.x-v1.0
mx8mm-debian-bullseye-5.4-2.1.x-v1.1
mx8mm-debian-bullseye-5.4-2.1.x-v1.2
mx8mm-debian-bullseye-5.4-2.1.x-v1.3
mx8mm-debian-bookworm-6.1.36_2.1.0-v1.0
mx8mm-debian-bookworm-6.1.36_2.1.0-v1.1
RN_mx8mm-debian-bullseye-5.4-2.1.x-v1.2
|- | Release 1.2 || |- | U-Boot updates || |- | Add ADIN PHY || Moved delay to driver tree node |- | Linux kernel updates || |- | Enable driver for ADIN PHY || |- | Release 1.1 || |- | U-Boot updates || |- | imx8mm-var-som: Use default DDR4 QoS settings || This fixes USB performance issues |- | Linux kernel updates || |- | Updated to version 5.4.142 || Merge remote-tracking branch 'fslc/5.4-2.1.x-imx' into 5.4-2.1.x-imx_var01 |- | imx8_var_defconfig: add full docker support || |- | imx8mm-var-dart: Introduce support for pcal6408 || pcal6408 replaces tca6408 on DT8MCustomBoard rev. >= 2.1A |- | gpio: pca953x: Introduce standard-regs-fallback property || |- | gpio: pca953x: Introduce support for nxp,pcal6408 || |- | Revert "Revert "gpio: pca953x: Disable PM routines"" || |- | Revert "MLK-14801 input: touch: ads7846: fix the pressure_max setting" || |- | sn65dsi83: Add device tree property to swap LVDS Channel A/B || |- | imx8mm-var-som: Disable usbotg1 hnp, srp, and adp || |- | imx8mm-var-dart: Disable usbotg1 hnp, srp, and adp || |- | Debian updates: || |- | pulesaudio: Fix pulseaudio system-wide mode || |- | systemd: set HandlePowerKey to ignore || |- | freertos-variscite: Add initial support for imx8mm || |- | deb: Add bluez-alsa 3.0.0 aligned to Dunfell release || |- | bluez-alsa: ported bluez-alsa support from yocto-dunfell || |- | weston_rootfs: Add libgpiod and libgpiod tools || |- | imx8: libgbm1 updated to 20.3.4-1 required by latest weston update || |- | Release 1.0 || |- | Linux kernel updates: || |- | Upgraded to kernel version 5.4.85 || |- | Added support for DART-MX8M-MINI on DT8MCustomBoard V2.0 || |- | Added support for VAR-SOM-MX8M-MINI revision 1.3 || |- | Older VAR-SOM-MX8M-MINI revisions need DTS adjustments for correct CAN operation || See: VAR-SOM-MX8M-MINI/NANO rev. 1.0/1.1/1.2 CAN bus support |- | U-Boot updates: || |- | Upgraded to the imx_v2020.04_5.4.24_2.1.0_var02 branch || |- | Debian build updates: || |- | Fix package dependencies and clean up || |- | Clean-up /tmp in the rootfs after building the Linux kernel headers package || |- | Refactored Debian package installation to three groups: base, graphics & gstreamer-multimedia || |- | Updated imx-firmware version to 8.8 || |- | Updated Wi-Fi and BT firmware to Laird release 8.2.0.16 || |- | imx-atf: Build atf bl31.bin from source code from imx_5.4.24_2.1.0_var01 branch || |- | imx-mkimage: Update patch to align to Yocto Dunfell ||
|- | Release 1.3 || |- | U-Boot updates || |- | variscite: eth: ADIN1300: Disable RGMII RX clock delay || |- | Linux kernel updates || |- | imx8_var_defconfig: enable docker requirements || |- | Revert "imx8_var_defconfig: add full docker support" ||
RN_mx8mm-debian-bookworm-6.1.36_2.1.0-v1.0
|- | Release 1.0 || |- |Major Updates || |- | Initial Debian Bookworm 6.1.36_2.1.0 release || Based on NXP Yocto Mickledore 6.1.36_2.1.0 and NXP Linux kernel lf-6.1.y |- | Debian Build System || Starting with 6.1.36_2.1.0 Yocto is used to build Debian |-
RN_mx8mm-debian-bookworm-6.1.36_2.1.0-v1.1
|- | Release 1.1 || |- |Major Updates || |- | Moved CMA location for 4 GB SoMs || This improves the performances when playing videos using SoMs |- | Updated LVDS porches || |-
| uboot-imx Updates || [/compare/b87559e2d08d72628147447709c99d9fb9efc390...90c6d299d304f34830a621910469465f851feeca Click here] for a full detailed change list.
|-
| linux-imx Updates || [/compare/83f6d500c90f615fdc118b032f76d880ce6a0bcc...783c799b7c005c1fc18c6b477044ddc12befa145 Click here] for a full detailed change list.
|-
| meta-variscite-bsp-imx Updates || Click here for a full detailed change list.
|-
| meta-variscite-bsp-common Updates || Click here for a full detailed change list.
|-
| meta-variscite-sdk-imx Updates || Click here for a full detailed change list.
|-
| meta-variscite-sdk-common Updates || Click here for a full detailed change list.
|-
| meta-variscite-debian Updates || Click here for a full detailed change list.
|-
VAR-SOM-MX8X
buster-4.14.98-imx8qxp-v1.0
buster-4.14.98-imx8qxp-v1.1
buster-4.14.98-imx8qxp-v1.2
buster-4.14.98-imx8qxp-v1.3
buster-4.14.98-imx8qxp-v2.0
buster-4.14.98-imx8qxp-v2.1
buster-4.14.98-imx8qxp-v2.2
buster-4.14.98-imx8qxp-v2.3
bullseye-5.4.85-imx8qxp-v1.0
mx8x-debian-bullseye-5.4-2.1.x-v1.1
VAR-SOM-MX8
buster-4.14.98-var-som-imx8-v1.0
buster-4.14.98-var-som-imx8-v1.1
buster-4.14.98-var-som-imx8-v1.2
bullseye-5.4.85-var-som-imx8-v1.0
bullseye-var-som-imx8-v1.1
VAR-SOM-MX8M-NANO
buster-4.14.98-imx8mn-v1.0
buster-4.14.98-imx8mn-v1.1
bullseye-5.4.24-imx8mn-v1.0
bullseye-5.4.85-imx8mn-v2.0
bullseye-5.4.85-imx8mn-v2.1
bullseye-5.4.142-imx8mn-v1.0
DART-MX8M-PLUS
bullseye-5.4.70-mx8mp-v1.0
bullseye-5.4.70-mx8mp-v2.0
bullseye-5.4.70-mx8mp-v2.1
bullseye-5.4.70-mx8mp-v2.2
bullseye-5.10.52-mx8mp-v1.0