Yocto Build U-Boot: Difference between revisions

From Variscite Wiki
No edit summary
No edit summary
Line 70: Line 70:


{{#ifeq: {{#var:SOC_FAMILY}}|imx8|
{{#ifeq: {{#var:SOC_FAMILY}}|imx8|
<br>
  # Download and build imx_mkimage
  # Download and build imx_mkimage
  $ git clone {{#var:NXP_IMX_GIT}}/imx-mkimage -b {{#var:NXP_IMX_BRANCH}}
  $ git clone {{#var:NXP_IMX_GIT}}/imx-mkimage -b {{#var:NXP_IMX_BRANCH}}
Line 77: Line 78:
  $ cd ..
  $ cd ..
|
|
<br>
  # Download imx_mkimage
  # Download imx_mkimage
  $ git clone {{#var:NXP_IMX_GIT}}/imx-mkimage -b {{#var:NXP_IMX_BRANCH}}
  $ git clone {{#var:NXP_IMX_GIT}}/imx-mkimage -b {{#var:NXP_IMX_BRANCH}}
  $ cp imx-mkimage/iMX8M/*.c imx-mkimage/iMX8M/*.sh {{#var:YOCTO_NAME}}|Morty||imx-mkimage/scripts/pad_image.sh .
  $ cp imx-mkimage/iMX8M/*.c imx-mkimage/iMX8M/*.sh {{#ifeq: {{#var:YOCTO_NAME}}|Morty||imx-mkimage/scripts/pad_image.sh}} .
}}
}}



Revision as of 15:44, 20 June 2019

Yocto Build U-Boot from source code

Toolchain installation for out of Yocto builds

To install the toolchain, follow Yocto Toolchain installation.

Build U-Boot out of Yocto tree

Obtain sources:

$ git clone https://github.com/varigit/uboot-imx.git -b imx_v2015.04_4.1.15_1.1.0_ga_var03
$ cd uboot-imx

Configure compilation environment:

$ source /opt/fslc-x11/2.2.1/environment-setup-armv7at2hf-neon-fslc-linux-gnueabi

Cleanup everything:

$ make mrproper

Select one of the following configurations:

For booting from SD card/eMMC:
$ make mx6var_som_sd_defconfig

For booting from NAND flash:
$ make mx6var_som_nand_defconfig

Build U-Boot:

$ make -j4

/*.sh scripts/pad_image.sh ..

$ cd ..

|

# Download imx_mkimage
$ git clone /imx-mkimage -b 
$ cp imx-mkimage/iMX8M/*.c imx-mkimage/iMX8M/*.sh  .

}}

# Download and build ATF
$ git clone /imx-atf -b 

$ cd imx-atf
$ source /opt/fslc-x11/2.2.1/environment-setup-armv7at2hf-neon-fslc-linux-gnueabi
$ export LDFLAGS=

$ make PLAT= bl31
$ cp build//release/bl31.bin ..
$ cd ..
# Copy u-boot binaries
$ cp ../tools/mkimage mkimage_uboot
$ cp ../u-boot.bin .




# Build boot image
$ make -f soc.mak clean
$ make -f soc.mak SOC= dtbs= PAD_IMAGE=./pad_image.sh CC=gcc OUTIMG=u-boot.img-sd flash

}}

Install the built U-Boot on an SD card


$ sudo dd if=SPL of=/dev/sdX bs=1K seek=1; sync
$ sudo dd if=u-boot.img of=/dev/sdX bs=1K seek=69; sync
(Replace /dev/sdX with the correct device)

If you want to use our recovery SD card to flash the built U-Boot to NAND flash/eMMC, then copy it to the appropriate location in the SD card:

$ sudo cp SPL /media/rootfs/opt/images/... 
$ sudo cp u-boot.img /media/rootfs/opt/images/...

And eject the SD card gracefully from host machine.


Note: If you manually upgrade an existing U-Boot, and you have an old environment saved, it is a good idea to reset your environment to the new default (see Environment handling commands)

Update your U-Boot out of Yocto tree

$ git pull