Debian Platform Customization

From Variscite Wiki
Revision as of 21:21, 7 January 2018 by Admin (talk | contribs) (Created page with "= Debian = == Documentation == === Stretch 9 === <section begin=DEBIAN_DOC_9/> * Debian 9 - Stretch (released on 06/17/2017) Documentation is available from [https://wiki.debi...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Debian

Documentation

Stretch 9

  • Debian 9 - Stretch (released on 06/17/2017)

Documentation is available from wiki.debian.org


VAR-SOM-MX6

Build Results

The resulted images are located in ~/var_som_mx6_debian/output/.

Image Name
How to use
rootfs.tar.bz2 Used to create sdcard
uImage Linux kernel image
SPL.mmc SPL built for SD-Card and eMMC boot. The SPL is pre-u-boot SW component, required for DDR initialization
u-boot.bin.mmc u-boot built for SD-Card boot, or eMMC boot in case of DART-MX6UL.
Device Tree Name
Boot Device
imx6dl-var-som-cap.dtb VAR-SOM-MX6 with iMX6S/DL on MX6CustomBoard with capacitive touch
imx6dl-var-som-res.dtb VAR-SOM-MX6 with iMX6S/DL on MX6CustomBoard with resistive touch
imx6dl-var-som-solo-cap.dtb VAR-SOM-SOLO with iMX6S/DL on MX6CustomBoard with capacitive touch
imx6dl-var-som-solo-res.dtb VAR-SOM-SOLO with iMX6S/DL on MX6CustomBoard with resistive touch
imx6dl-var-som-solo-vsc.dtb VAR-SOM-SOLO with iMX6S/DL on SOLOCustomBoard with capacitive touch
imx6dl-var-som-vsc.dtb VAR-SOM-MX6 with iMX6S/DL on SOLOCustomBoard with capacitive touch
imx6q-var-dart.dtb DART-MX6 with iMX6D/Q on DARTCustomBoard with capacitive touch
imx6q-var-som-cap.dtb VAR-SOM-MX6 with iMX6D/Q on MX6CustomBoard with capacitive touch
imx6q-var-som-res.dtb VAR-SOM-MX6 with iMX6D/Q on MX6CustomBoard with resistive touch
imx6q-var-som-vsc.dtb VAR-SOM-MX6 with iMX6D/Q on SOLOCustomBoard with capacitive touch


DART-6UL

Build Results

The resulted images are located in ~/var_mx6ul_dart_debian/output/.

Image Name
How to use
rootfs.tar.bz2 Used to create sdcard and rootfs.ubi.img
rootfs.ubi.img Use for flash to nand
zImage Linux kernel image
SPL-nand SPL built for NAND flash. The SPL is pre-u-boot SW component, required for DDR initialization
SPL-emmc SPL built for SD card and eMMC boot. The SPL is pre-u-boot SW component, required for DDR initialization
u-boot.bin.nand U-Boot built for NAND flash.
u-boot.bin.emmc u-boot built for SD card boot, or eMMC boot in case of DART-MX6UL.
Device Tree Name
Boot Device
imx6ul-var-dart-emmc_wifi.dtb Boot from internal eMMC with WiFi enabled. (SD card & NAND flash disabled)
imx6ul-var-dart-nand_wifi.dtb Boot from internal NAND flash with WiFi enabled. (SD card & eMMC disabled)
imx6ul-var-dart-sd_emmc.dtb SD card and eMMC enabled (WiFi & NAND disabled). You can boot from eMMC or SD card
imx6ul-var-dart-sd_nand.dtb SD card and NAND flash enabled (WiFi & eMMC disabled). You can boot from NAND flash or SD card


VAR-SOM-MX7

Build Results

The resulted images are located in ~/var_mx7_var_som_debian/output/.

Image Name
How to use
rootfs.tar.bz2 Used to create sdcard and rootfs.ubi.img
rootfs.ubi.img Use for flash to nand
zImage Linux kernel image
u-boot.img.nand U-Boot built for NAND Flash.
u-boot.img.emmc u-boot built for SD-Card boot, or eMMC boot in case of DART-MX6UL.
Device Tree Name
Boot Device
imx7d-var-som-emmc.dtb Boot from SD or internal eMMC
imx7d-var-som-nand.dtb Boot from internal NAND


Platform Customizations

VAR-SOM-MX6

stretch-4.9.11-mx6-v1.0

DART-6UL

stretch-4.9.11-mx6ul-v1.0

VAR-SOM-MX7

stretch-4.9.11-mx7-v1.0